Hi Ray, I don't know if Lab-Tek are the same as MatTek (200 Homer Avenue, Ashland MA 01721) but here is the Tel . No for the latter: 508-881-6771, 800-634-9018, Fax No. : 508-879-1532. The make the Petri plates in all sorts of sizes. I hope that this helps. Warmest regards from: Fareed Al-Gurg Dubai Hospital, Dubai - UAE. ray hester wrote: > Hi, This isn't a flow question but thought someone might be able to > help us. We are looking for a source of 35 mm Petri plates that have a > 1 cm (approx.) hole bored through the bottom and a #1 coverglass glued > over/under the hole. We want to use these with viable cells in > culture, an inverted fluorescence scope, and the 100x oil objective > (we don't have access to an upright fluorescence scope with water > objectives). I know about the availability of coverglass-bottomed > Lab-Tek chambers, but the investigator wants to perfuse the culture > and I don't think the Lab-Tek chambers will work as well as a Petri > plate for this purpose. I know you can make these by simply boring > the hole and gluing a coverglass in place but we would like to know of > a commercial source for these if possible. Thanks for any leads. Ray
This archive was generated by hypermail 2b29 : Wed Apr 03 2002 - 11:54:11 EST