|
|
MoFlo Fluidics
The heart of the fluidic subsystem is the CytoNozzle™ (Figure 1). It is designed to operate at high pressures and flow rates, with high stability and minimal resonance effects, and is engineered with attention toward minimizing cavities where contaminates could accumulate. All tubing, connectors and valves are of the type used in High Pressure Liquid Chromatography applications, where possible. These parts have extremely low dead volumes, very stable physical characteristics and a high resistance to reagents. All tubing is color coded throughout the MoFlo for ease of use and safety.
There are two MoFlo sample injection systems available. Both have been designed to minimize carry-over contamination between samples and are easily dismantled for autoclaving and  sterilization. Either system can be attached to an optional water circulator for temperature maintenance. The manual sample block offers simplicity, speed of sample exchange and a built-in kinetics reagent port. The Automated Sample Station provides a high level of operator safety by completely enclosing the sample in a pressurized chamber, thus removing the risk of tube fracture and loss of sample containment. It has built-in three-speed sample agitation to ensure long-term sample stability for extended duration sorts and analyses.
For more information about our products, please contact Cytomation
at information@cytomation.com.
Top of Page
|
