COULTER^® N4 Series Control Samples

N4 Series Size Controls are for use with the COULTER® N4  SD, COULTER® N4  MD, and COULTER® N4 PLUS photon correlation spectroscopy submicron particle size analyzers. All N4 Series controls consist of latex particles. N4 Series controls should be selected based on the size range of interest. The assay is performed at a scattering angle of 90° making it also suitable for checking the performance of other PCS instruments.

COULTER® N4 PLUS

Particle Size Controls

Part Number	Catalog Description	Quantity/Pack
6602784	N4 Size Control L50, nominal 50 nm latex particles	1 x 15ml
6602785	N4 Size Control L100, nominal 100 nm latex particles	1 x 15ml
6602786	N4 Size Control L200, nominal 200 nm latex particles	1 x 15ml
6602787	N4 Size Control L300, nominal 300 nm latex particles	1 x 15ml
6602788	N4 Size Control L500, nominal 500 nm latex particles	1 x 15ml
6602789	N4 Size Control L800, nominal 800 nm latex particles	1 x 15ml
6602790	N4 Size Control L1000, nominal 1000 nm latex particles	1 x 15ml
6602791	N4 Size Control L1300, nominal 1300 nm latex particles	1 x 15ml
6602336	N4 Size Controls, Mixed Kit, 1 ea. 50, 100, 200, 300 & 500 nm	5 x 15ml

DELSA Series Mobility and Size Control

COULTER® DELSA 440SX

The DELSA Series Mobility and Size Control is intended for use with the  COULTER® DELSA440 and COULTER® DELSA 440SX Electrophoretic Mobility Analyzers. A Conductivity value is also given. DELSA Control EMPSL is a washed, titrated, carboxylate-modified polystyrene latex in 0.01 M sodium phosphate buffer at pH 7.0. The nominal mobility is -4.0 µm·cm/V·s, the nominal conductivity is 1.25 mS/cm, and the nominal size is 310 nm.

Part Number	Catalog Description	Quantity/Pack
8304073	DELSA Control EMPSL	5 x 19 ml

Coulter^TM SA 3100^TM BET Surface Area Control Sample

The BET Surface Area Control Sample is intended for use with the CoulterTM SA 3100TM, the SA 3100 Plus and the CoulterTM OMNISORPTM  range of Gas Adsorption Analyzers. May also be used to check the performance of any BET Surface Area Analyzer. BET Surface Area control P308 This sample consists of extruded alumina pellets. Although intended for use with the SA 3100 Series instruments, it can be used with any BET surface area measuring instrument. The sample should be outgassed for the temperature and time as specified on the enclosed assay sheet. This sample has a nominal BET surface area value of 308 m2/g.

Part Number	Catalog Description	Quantity/Pack
8201446	BET Surface Area Control Sample Alumina P308	1 x 1 g

---

---

---

© Coulter International Corporation, 1996. All rights reserved. Copyrights and Trademarks

CD ROM Vol 2 was produced by staff at the Purdue University Cytometry Laboratories and distributed free of charge as an educational service to the cytometry community. If you have any comments please direct them to Dr. J. Paul Robinson, Professor & Director, PUCL, Purdue University, West Lafayette, IN 47907. Phone:(317) 494-0757; FAX (317) 494-0517; Web http://www.cyto.purdue.edu EMAIL robinson@flowcyt.cyto.purdue.edu