Re: Transfer rate HP->PC

Leon Martin (martin@cobra.path.monash.edu.au)
Thu, 17 Jun 1993 11:39:30 +1000

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: Christopher A. Worth: "follow up HP>> PC"
Previous message: Christopher A. Worth: "follow up HP>> PC"
Maybe in reply to: Dave Coder: "Transfer rate HP->PC"

Eric,
>
>With this set-up, a 42K file takes 14 seconds to transfer, so it
>goes at 3K bytes/second.
>
>I'm curious whether a 16 bit board speeds things up, and how WHPPC compares
>with HPPCLINK.
>
Initially (before I set up ethernet) I used HPPCLINK. Pc was 386/25 with a
reasonably quick big ESDI disk. I used the 16 bit National Instruments
card. Transfer rates from HP 310 <==> Pc were ~5Kbytes/sec; HP 340 <==> Pc
were ~6Kbytes/sec.

____
| |
/ | _
|-------> ( )
\ | ~
|____| /|
__| |__ ___/ |
|_______|^^^^ ---
|
|
--
Leon Martin Department of Pathology Monash University Australia
martin@cobra.path.monash.edu.au +61 3 276 2601 Fax +61 3 529 8359

Next message: Christopher A. Worth: "follow up HP>> PC"
Previous message: Christopher A. Worth: "follow up HP>> PC"
Maybe in reply to: Dave Coder: "Transfer rate HP->PC"

CD ROM Vol 2 was produced by staff at the Purdue University Cytometry Laboratories and distributed free of charge as an educational service to the cytometry community. If you have any comments please direct them to Dr. J. Paul Robinson, Professor & Director, PUCL, Purdue University, West Lafayette, IN 47907. Phone:(317) 494-0757; FAX (317) 494-0517; Web http://www.cyto.purdue.edu EMAIL robinson@flowcyt.cyto.purdue.edu