Products
Pricing
and ordering information
FlowMetrix System
The system platform contains the
hardware and software that perform analysis on a
Becton-Dickinson FACScanTM or FACSCaliburTM. The
hardware consists of a high quality personal computer with
the Luminex digital signal processor installed, 1024 x 768
high color display, switch box and GPIO cables to interface
both the FlowMetrix System and your current control system to
the FACScan or FACSCalibur. The FlowMetrix analysis software
is preloaded and configured on your computer. To insure an
accurate setup, calibration microspheres are included to
insure consistent results time after time. And to get your
development started quickly, a generous supply of development
microspheres are included with the FlowMetrix System.
Installation assistance and technical support are a phone
call away, toll free in the North America.
| |
Order #
|
Description
|
| FlowMetrix
System |
51-50001
|
Analysis platform that supports
multiplexed assays on either a FACScan or
FACSCalibur. The platform can co-exist with or
replace the existing control system.
|
Development Microspheres
Development microspheres provide an
economical means to discover and optimize the characteristics
of individual biomolecular interactions. A development
microsphere's surface is identical to the surface of the
multiplexing microspheres. They are available with either a
carboxylated coating or an avidin coating.
| |
Order #
|
Description
|
| Development Microspheres |
41-10000
|
1 x 1 ml with a LumAvidin* coating |
| |
41-20000
|
1 x 1 ml with a streptavidin coating |
| |
41-50000
|
1 x 1 ml carboxylated surface |
*LumAvidin
coated microspheres are optimized to combine the high
specific activity of avidin with the low, nonspecific binding
properties of streptavidin.
Multiplexing Microspheres
Multiplex microspheres deliver the
power of FlowMetrix. Once the individual component reactions
are fully understood, multiplexing microspheres allow the
reactions and controls to be mixed and measured
simultaneously. They are available with either a carboxylated
coating or an avidin coating.
| |
Order #
|
Description
|
| Multiplexing Microspheres with
LumAvidin* coating |
43-11001
|
250 mL each of the A (red) regions |
| |
43-11002
|
250 mL each of the B (purple) regions |
| |
43-11003
|
250 mL each of the C (blue) regions |
| |
43-11004
|
250 mL each of the D (orange) regions |
| Multiplexing Microspheres with
streptavidin coating |
43-21001
|
250 mL each of the A (red) regions |
| |
43-21002
|
250 mL each of the B (purple) regions |
| |
43-21003
|
250 mL each of the C (blue) regions |
| |
43-21004
|
250 mL each of the D (orange) regions |
| Multiplexing Microspheres with
carboxylated surface |
43-51001
|
250 mL each of the A (red) regions |
| |
43-51002
|
250 mL each of the B (purple) regions |
| |
43-51003
|
250 mL each of the C (blue) regions |
| |
43-51004
|
250 mL each of the D (orange) regions |
Calibration Microspheres
Calibration microspheres are a precise
blend of microspheres designed to assure consistency time
after time. The calibration microspheres make confidence in
your measurements easy to establish and maintain.
| |
Order #
|
Description
|
| Calibration Microspheres |
41-55001
|
1 x 6 ml calibration mixture |
Feasibility Demonstrations
Custom feasibility demonstrations are
available from Luminex on a contract basis.
Pricing
and ordering information
Home | Technology | Products
Copyright
© 1998 Luminex Corporation. All rights reserved. Trademark, disclaimer
and legal information.