 |
 |
 |
 |
 |
We've done this three ways.
Transceivers that go from 10Base2 ("thin wire"; coax cable, BNC
connector) to 10BaseT ("twisted pair"; RJ45 connector) include: St.
Clair SN1011; and the 10T Hub/8 from Asante. The latter provides one
BNC connector and 8 10BaseT connectors. Several computers can share
the same wall socket, but the connection can be unreliable if two
computers use it simultaneously. We've also used a transceiver that
has an AUI (15 pin) connector in one side and a 10BaseT on the
other. Model CTP100t from Cabletron.
All these transceivers use a 115V power adapter.
Dave Coder
dcoder@u.washington.edu
|
|
|
|
|
|
CD-ROM Vol 3 was produced by Monica M. Shively and other staff at the
Purdue University Cytometry Laboratories and distributed free of charge
as an educational service to the cytometry community.
If you have any comments please direct them to
Dr. J. Paul Robinson, Professor & Director,
PUCL, Purdue University, West Lafayette, IN 47907.
Phone: (765)-494-0757;
FAX(765) 494-0517;
Web