 |
 |
 |
 |
Version 3.4a (released 6/4/93) differs from version 3.4 (released 6/1/93)
only in that the free memory required for satisfactory operation has
been reduced from 530K to 460K. If version 3.4 is running satisfactorily*
with your DOS configuration, you don't need 3.4a.
If you want to try 3.4a, be sure to get TWO (2) program files, MFI.EXE
and MFIHELP.EXE. Put both files on your DOS path. MFI will use
MFIHELP automatically whenever on-line help is requested. There will
be a significant delay before help is displayed on the screen if you
do NOT have expanded memory.
-------------------------------
* To push the memory requirements to the maximum, request that 2,000
dots be displayed on the dot plot. If this does not cause MFI to
abort when displaying a dot plot, try setting a gate which covers more
than half of the entire dot plot area. On a VGA screen, this will
cause an out-of-memory abort with 3.4 even with 550K free memory.
3.4a can support a VGA gate which covers nearly all of the dot plot in
550K; "reasonable"-sized gates and 1,000-dot plots will work in 460K.
/*- - - - - - - - - - - - - - - - - - - - PLEASE NOTE NEW EMAIL ADDRESS
Eric Martz emartz@microbio.umass.edu
Professor of Immunology Voice: 413-545-2325 FAX: 413-545-1578
Morrill IVN 203, University of Massachusetts, Amherst MA 01003
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -*/
--Boundary (ID Uy0SeK/0ttl5A7IqmOxsZg)--
/*- - - - - - - - - - - - - - - - - - - - PLEASE NOTE NEW EMAIL ADDRESS
Eric Martz emartz@microbio.umass.edu
Professor of Immunology Voice: 413-545-2325 FAX: 413-545-1578
Morrill IVN 203, University of Massachusetts, Amherst MA 01003
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -*/
|
|
|
|