Memory problem with Cell Quest
Steven Merlin (merlin@patho.unibe.ch)
Thu, 24 Aug 1995 18:11:10 +0200
In response to the message regarding low memory with Cell Quest run on a
Quadra 650/16 Mb RAM, I am assuming this system is equipped with the HP
1200C/PS printer. If the error message appears on the screen and on a
printout as "Limit check" and/or "stack error", the problem is most likely
the result of the memory buffer size installed in the printer. To check its
size, perform a printer "self test". The resulting printout will indicate
the amount of memory installed.
The printer memory is expandable and technical specifications for your
specific needs can be found in the HP DeskJet 1200C and 1200C/PS Printers
User's Guide, pages 2-6, 2-7, 6-4 and 8-5.
Steven Merlin
University of Bern
FACS Lab
Institute for Immunology and Allergy
Murtenstrasse 31
CH-3010 Bern
Switzerland
Voice: ++41-31-632-8876 or 9968
Fax: 381-8764
e-mail: merlin@patho.unibe.ch
CD ROM Vol 2 was produced by staff at the Purdue University Cytometry Laboratories
and distributed free of charge as an educational service to the cytometry community.
If you have any comments please direct them to Dr. J. Paul Robinson, Professor & Director, PUCL,
Purdue University, West Lafayette, IN 47907. Phone:(317) 494-0757; FAX (317) 494-0517; Web http://www.cyto.purdue.edu
EMAIL robinson@flowcyt.cyto.purdue.edu
