Re: 1.Instrument settings
TedKunich@aol.com
Mon, 14 Aug 1995 02:42:07 -0400
Past threads on this mailing list have indicated a need for a simple way of
obtaining instrument settings from CellQuest data files. I have written a
small Mac application and have made it available to the Flow community free
of charge. This application decodes and prints the instrument settings found
in CellQuest's data files. Only data files created with CellQuest versions
1.1 and greater and FACScan, FACSort, and FACSCalibur brand flow cytometers
are supported by this application. It can be found via ftp at
flowcyt.bio.umass.edu/pub/flowcyt/dropprint, or via the WWW at
http://www.bio.umass.edu/mcbfacs/flowcat.html. Please read the included
README document (contained in archive) for important information on terms and
limitations regarding the use of this program.
** THIS APPLICATION IS NOT A BDIS PRODUCT NOR IS IT **
** ENDORSED OR SUPPORTED BY BDIS IN ANY WAY. **
Ted
CD ROM Vol 2 was produced by staff at the Purdue University Cytometry Laboratories
and distributed free of charge as an educational service to the cytometry community.
If you have any comments please direct them to Dr. J. Paul Robinson, Professor & Director, PUCL,
Purdue University, West Lafayette, IN 47907. Phone:(317) 494-0757; FAX (317) 494-0517; Web http://www.cyto.purdue.edu
EMAIL robinson@flowcyt.cyto.purdue.edu
