Re: help required

• Messages sorted by: [ date ][ thread ][ subject ][ author ]
• Next message: Jaroslav Dolezel: "linearity in ploidy screening"
• Previous message: Eric Martz: "RE: Sorting Hybridoma Cells"
• In reply to: Dr. Mark Chambers: "help required"

> I have another question. We would like to invest in a FACS machine for our
> P3 facility.

The Brite made by BioRad has to be worth a look although its not a
sorter. There are a few in the UK you could look at. If your room is very
small I would also consider the ammount of heat generated, lasers make
lots of heat, can you duct away the heat from a P3 lab?

Good luck

Simon Monard
Cambridge
UK

• Next message: Jaroslav Dolezel: "linearity in ploidy screening"
• Previous message: Eric Martz: "RE: Sorting Hybridoma Cells"
• In reply to: Dr. Mark Chambers: "help required"

CD ROM Vol 2 was produced by staff at the Purdue University Cytometry Laboratories and distributed free of charge as an educational service to the cytometry community. If you have any comments please direct them to Dr. J. Paul Robinson, Professor & Director, PUCL, Purdue University, West Lafayette, IN 47907. Phone:(317) 494-0757; FAX (317) 494-0517; Web http://www.cyto.purdue.edu EMAIL robinson@flowcyt.cyto.purdue.edu