Re: Parallel to HPIB
Dennis_Young@CIS.ucsd.edu
Tue, 14 Mar 1995 09:49:00 -0800
I use an CEC IEEE-488 board (used for Verity's WHPPC transfer of data from/to
the HP) in the PC to talk to the GPIO.
Eric Martz help me firgure out how to configure the board so that I now can
print from Windoze directly to the Painjet. The problem is the controller board
configuration. I wrote a small routine to reset the IEEE-488 board. I can't
print when the HP is trying to control the printer, so I turn off the power to
the HP's CPU.
_/_/_/ _/_/_/_/ _/ _/
_/ _/ _/ _/ _/
_/ _/ _/ _/
_/ _/ _/ _/ _/
_/ _/_/ * _/_/_/ * _ /*
*****************************************************************************
* Dennis J. Young Voice : (619) 543-3928 *
* Flow Cytometry Core Facility FAX : (619) 543-7487 *
* University of California, San Diego USA e-mail: djyoung@ucsd.edu *
*****************************************************************************
CD ROM Vol 2 was produced by staff at the Purdue University Cytometry Laboratories
and distributed free of charge as an educational service to the cytometry community.
If you have any comments please direct them to Dr. J. Paul Robinson, Professor & Director, PUCL,
Purdue University, West Lafayette, IN 47907. Phone:(317) 494-0757; FAX (317) 494-0517; Web http://www.cyto.purdue.edu
EMAIL robinson@flowcyt.cyto.purdue.edu