Re: problem with 733MHz Mac equipped Calibur

On 04/01/2007, at 3:26 AM, Fishbaugh, Justin wrote:

> Greetings,
>
> We have a FACS Calibur controlled by a 733MHz G4 Mac.  Once data is  
> collected and the Mac is rebooted, the Mac will not reconnect with  
> the instrument.  The only way to establish communication between  
> the Calibur and Mac is to power them both down and bring them back  
> up from a cold start.  I am trying to determine whether this is  
> normal for Caliburs equipped with a 733MHz Mac.  I have conflicting  
> information from BD and other labs on our campus that use  
> Caliburs.  The Mac is running OS 9.2, Cellquest 3.3, and BD Inits  
> 3.4.2.
>
>
> Thank you for any helpful information.
>
> Justin
>
>
> Justin Fishbaugh


Our Calibur connected to an 450 Mhz G4 running OS 9.0.4 exhibits the  
same symptoms...

Regards,

Adrian Smith
Centenary Institute, Sydney, Australia