Re: Fwd: UV-laser LSR II

From: William Telford (TelfordW@mail.nih.gov)
Date: Thu Nov 20 2003 - 12:56:24 EST 




Hello Lenjou...


We just received our Lightwave mode-locked UV from BD, so they appear to
be shipping quantities of them now.  Although we haven't mounted it
on the LSR II yet, we've tested it on our FACSVantage. The power output
(20 mW) seems very stable, and the beam spot has a nice elliptical
shape.  Even on the stream-in-air Vantage it gives decent
sensitivity with our linearity beads (despite its somewhat low power
level) - it should work much better on the LSR II.  Heat output is
negligible.  So overall a nice laser - worth the wait.

b16b4b.jpg

Bill Telford

NCI-NIH




At 09:49 AM 11/20/2003 -0500, veena kapoor wrote:


From:
"Lenjou, Marc" <Marc.Lenjou@uza.be>

To: cyto-inbox
<veenak@helix.nih.gov>

Subject: UV-laser LSR II

Date: Wed, 19 Nov 2003 14:56:52 +0100

X-Sanitizer: murus Advosys mail filter





   Dear,


   Recently we have purchased a BD-LSR-II flow cytometer with a
4 laser

line-up . In december the HeCd-laser will be replaced by the solid
state

UV-laser . I wander if you have already any experience with this laser
on

the lSR -II ? If you are interrested we can  share some info about
our

results with this laser on our respective flow cytometers . Our
facility

uses for its research also a BD-Facscan, BD-Facstar  Plus and 
a

BD-FacsVantage SE . For routine immunophenotyping we use the Coulter XL
and

soon a Coulter FC500 . I hope this is not too inconvenient for you or
your

lab-people ,


   Many thanks in advance,


  Lenjou Marc





Lenjou Marc

Flow Cytometry Unit

Laboratory of Experimental Hematology

Laboratory of Ecophysiology

University Hospital of Antwerp

Wilrijkstraat,10

2650 Edegem

Belgium

Tel: 0032/(0)3/821.38.34

       0032/(0)3/821.39.06

Fax: 0032/(0)3/825.11.48

e-mail: marc.lenjou@uza.be







b16b4b.jpg











This archive was generated by hypermail 2.1.6 
: Thu Jan 01 2004 - 17:44:04 EST