Re: Fellow Elite Users...

From: /G=Gerhard/S=Nebe-von-Caron/OU=1890CHPE/O=TMGB.URC/@LANGATE.gb.sprint.com
Date: Thu Oct 12 1995 - 08:18:00 EST


          You could run the old software (pre ver4) as a dosbox inn 
          windows and then copy/paste the image by callin the window 
          via alt_space. That software cant read data from the more 
          recent software version, but if you have an XL or can get 
          hold of the XL software, that again can run as a DOS-box and 
          read also the more recent data files. You need to rebuild 
          the listmode directory each time as they can not read each 
          others .ldr files propperly.
          
          Alternatively use WINMDI or you have to buy a windows based 
          software from either DAKO , Phoenix or Coulter.
          
          Gerhard.nebe-von-caron@urcgb.sprint.com
          
          


______________________________ Reply Separator _________________________________
Subject: Fellow Elite Users...
Author:  HAVILAND@kids.wustl.edu at INTERNET
Date:    11/10/95 20:22


Greetings:
          
We are currently running a Coulter Elite with the current Version 4.0 
software - we haven't yet upgraded to 4.1.
          
Question:  Is there a way that we can save or re-direct histograms that 
have been analysed in "Multigraph" so that they are saved as an importable 
file rather than always printed????
          
I don't know how, but I also managed to get the Elite software to work 
though Windows-3.1.  After "going the rounds" with "memmaker", on a whim I 
invoked the Elite software and without locking up the system it worked. 
(I'm running a 486DX/33 with  8 Megs RAM).  On a second whim, I thought 
that I could bring up the histograms I wanted and try to pull them into the 
Windows clipboard - needless to say, the effort was futile.  Other than 
this one time, I have yet to bring up the Elite software again within 
Windows and I'm not the least bit confident of operating the system from 
within Windows...   I should note that prior to running memmaker (DOS 
6.22), all attempts to run the Elite software though Windows was rectified 
by having to "cold start" the computer.
          
Can anyone help with the original question?
          
Many thanks in advance,
David
=========================================================================== 
+  David L. Haviland, Ph.D.          Internet:"haviland@kids.wustl.edu"   + 
+  Washington Univ. School of Med.                                        + 
+  Dept. of Peds./Pulm. Box 8116                                          + 
+  1 Children's Place                                                     + 
+  St. Louis, MO  63110              FAX: 314-454-2476                    + 
+  (314) 454-6076                                                         + 
===========================================================================


This archive was generated by hypermail 2.1.6 : Thu Jan 01 2004 - 17:30:37 EST