From: Dennis_Young@CIS.ucsd.edu
Date: Tue Mar 14 1995 - 12:49:00 EST
I use an CEC IEEE-488 board (used for Verity's WHPPC transfer of data from/to
the HP) in the PC to talk to the GPIO.
Eric Martz help me firgure out how to configure the board so that I now can
print from Windoze directly to the Painjet. The problem is the controller board
configuration. I wrote a small routine to reset the IEEE-488 board. I can't
print when the HP is trying to control the printer, so I turn off the power to
the HP's CPU.
_/_/_/ _/_/_/_/ _/ _/
_/ _/ _/ _/ _/
_/ _/ _/ _/
_/ _/ _/ _/ _/
_/ _/_/ * _/_/_/ * _ /*
*****************************************************************************
* Dennis J. Young Voice : (619) 543-3928 *
* Flow Cytometry Core Facility FAX : (619) 543-7487 *
* University of California, San Diego USA e-mail: djyoung@ucsd.edu *
*****************************************************************************
This archive was generated by hypermail 2.1.6 : Thu Jan 01 2004 - 17:30:29 EST
