Hi Jim and Chris, I tested once how much pressure in the sheat my FACStarPLUS could stand. It could take 18-19 psi (around 1.3 bar) and when I went over that...BOOM! Best wishes, Mika University of Turku Finland PS. I won't do it again On Wed, 28 Jul 1999, Houston, Jim wrote: > > I have run a Star with the standard head up to 15 PSI. > Some can take it some cannot. > I have also superglued them back together with success. > If you do this you can raise your drop drive to 32k. > You still will only get adequate sort recoveries at system speeds no greater > than 6k/sec. > > Jim Houston > > > -----Original Message----- > > From: Chris Worth [SMTP:caw@bcc.louisville.edu] > > Sent: Tuesday, July 27, 1999 11:42 AM > > To: Cytometry Mailing List > > Subject: FACStar plus max sheath pressure? > > > > > > > > > > I'm just curious, what is the maximum sheath pressure you can operate the > > FS plus without it blowing apart? > > > > > > chris > > >
This archive was generated by hypermail 2b29 : Wed Apr 03 2002 - 11:53:48 EST