Hola todo mundo, I have a problem with our FACScan here, it suddently started to show weird numbers on thes Frontpanel Display, and you cannot connect from the Mac anymore to the machine (BDPac Status: undefined BDPac Int.). The numbers on the Frontpanel lack digits or show suddenly characters in the PMT Voltages. They change if one presses the buttons on the Frontpanel diplay, but towards other strange numbers. Also the Standby and Ready lights are lit both at the same time, as well as two of the Compensation Labels. Anybody any idea what's wrong ? I guess it's the status board thats no doing is job allright, or is there any 'reset' switch/trick for the machine or the status board ? I already checked the BD Mac Card and reset it but it doesn't change. I also removed/reseated all the cards - restarted the machine - no change. Bueno any help would be very appreciated, because flying in a service engineer is expensive here in Portugal, and if it's just the card, I'd prefer to diagnose it myself... just want to make sure I order the right one... Thanks as usual... Greetings from the sun.. Matthias _____________________________________ Dr. Matthias Haury Instituto Gulbenkian de Ciencia Unidade de Imagiologia Celular Rua Da Quinta Grande N° 6 - Apt.14 P-2781 Oeiras Codex Portugal Email: mhaury@igc.gulbenkian.pt Tel: + 351 (01) 440 79 85 Office Tel: + 351 (01) 440 79 10 Secretary Fax: + 351 (01) 440 79 70 _____________________________________
This archive was generated by hypermail 2b29 : Wed Apr 03 2002 - 11:53:40 EST