Hello everybody, as I had a couple of people wanting to know about the possible recycling of HP98785A Monitors (the ones installed with the 340 HP Lysis II Station), here is what I found out so far: Although I haven't tried either of these possibilities, several people in different news groups suggested that either of both solutions should work. There are two possibilities: 1. For PCs: Buy a videocard that supports the monitor: http://www.mirage-mmc.com/intro.htm http://www.mirage-mmc.com/48-55.htm?title=98785A http://www.avicom.net/softint.html http://www.photonweb.com/564-64/ If you have one of those videocards already, maybe a simple HD15 -> 3 BNC cable is enough. 2. For MacIntoshes: Get a MacSync cable from Griffin Technologies http://www.Nashville.Net/~griffin/ Here is some of the specs that I got from one of the webpages (no guarantee for validity) concerning this monitor (although I'd love to have the official documentation on this monitor - if anybody has it, send me a copy please !) Hewlett-Packard : HP98785A Maximum Resolution: 1280x1024, 60 Hz Scan Rates: Horizontal scan: 47.7 Khz Vertical refresh: 60 Hz Bandwidth: Mhz Monitor Type: Fixed Frequency Signal type: Analog Sync: Green Physical Specifications: Type of connector: 3 BNC CRT size: 16 Aperture grill Picture tube: Color Dot pitch: .26 mm Hope that get's you in the right direction. I'll let you know as soon as I managed to get this MacSync cable from Griffin Technologies. Ok, have a nice weekend. Cheers, Matthias ______________________________________________________________ Matthias Haury _/_/_/ _/_/_/ _/_/_/ Flowcytometry _/ _/ _/ _/ _/ Department of Immunology _/ _/_/_/ _/_/_/ Institut Pasteur _/ _/ _/ 25 rue du Dr. Roux _/_/_/ _/ _/ F - 75724 PARIS Cedex 15 INSTITUT PASTEUR PARIS France Email: mhaury@pasteur.fr Tel: 33 (01) 40 61 31 29 Fax: 33 (01) 45 68 86 39 ______________________________________________________________
This archive was generated by hypermail 2b29 : Wed Apr 03 2002 - 11:49:22 EST