control over argon I60 laser from epicsC
Frederic Preffer (preffer@HELIX.MGH.HARVARD.EDU)
Thu, 05 Sep 1996 13:18:01 -0400
Has anyone ever taken one of these coherent lasers that were *software
controlled* from the epics C and achieved independent control over the power
supply? I understand there is some hardware that needs to be added to power
supply as well as appropriate remote switches (eg "on" and "off"). Any
experience with this conversion (or un- needed hardware) would be appreciated.
ty
`````````````````````````````````````````````````
Frederic I. Preffer
preffer@helix.mgh.harvard.edu
Department of Pathology- Cox5
100 Blossom St
Massachusetts General Hospital
Boston MA 02114
(617) 726-7481 {fax x2365}
~~~~~~~~~~~~~~~~~~~~~~~~~~~
CD-ROM Vol 3 was produced by Monica M. Shively and other staff at the
Purdue University Cytometry Laboratories and distributed free of charge
as an educational service to the cytometry community.
If you have any comments please direct them to
Dr. J. Paul Robinson, Professor & Director,
PUCL, Purdue University, West Lafayette, IN 47907.
Phone: (765)-494-0757;
FAX(765) 494-0517;
Web
http://www.cyto.purdue.edu
, EMAIL
cdrom3@flowcyt.cyto.purdue.edu
CD-ROM Vol 3 was produced by Monica M. Shively and other staff at the
Purdue University Cytometry Laboratories and distributed free of charge
as an educational service to the cytometry community.
If you have any comments please direct them to
Dr. J. Paul Robinson, Professor & Director,
PUCL, Purdue University, West Lafayette, IN 47907.
Phone: (765)-494-0757;
FAX(765) 494-0517;
Web
http://www.cyto.purdue.edu
, EMAIL
cdrom3@flowcyt.cyto.purdue.edu
