bubbles in sheath
r_hicks@icrf.icnet.uk
Thu, 08 Sep 1994 16:16:23 BST
You could try degassing some buffer with a vaccuum, and then putting thedegassed
buffer into a bag/balloon inside your pressure vessel with the neck ofthe
bag/balloon tied to the outlet pipe of the sheath tank. This arrangementshould
prevent the sheath from saturating with gas, thereby preventingdepressurisation
bubbles. Alternatively you could try a mechanical (eg syringe) rather than an
air pump, this would probably be more expensive and intrusive(depending on what
machine you use) than the first option
Ray
CD-ROM Vol 3 was produced by Monica M. Shively and other staff at the
Purdue University Cytometry Laboratories and distributed free of charge
as an educational service to the cytometry community.
If you have any comments please direct them to
Dr. J. Paul Robinson, Professor & Director,
PUCL, Purdue University, West Lafayette, IN 47907.
Phone: (765)-494-0757;
FAX(765) 494-0517;
Web
http://www.cyto.purdue.edu
, EMAIL
cdrom3@flowcyt.cyto.purdue.edu
